THK Slide Block Manufacturer: Cutting Processing of THK Guide Rails


　　THK Slide Block Manufacturer: Thk guide rails have quickly replaced previous guide rails due to their unique manufacturing method, so many manufacturers now use them directly. At the same time, the accuracy during calibration, the accuracy of the output, and the speed of entry and exit of mechanical transmission mechanisms are constantly improving, which has led to many changes in the previous output functions. For example, before using the running-in method, in-depth analysis of the rolling guide rails has been conducted, and it can be found that there are still areas for improvement in the grinding method used for the rolling guide rails.


　　1. Because there are two machine tools installed on the already processed parts, next to the cross-roller workbench, two clamping processes were completed. When the secondary clamping begins, the error will lead to a decrease in the processing accuracy of the cross-roller workbench, and the processing waste cost will also increase accordingly.


　　2. Use two calibrated devices to separate the repaired road grinding wheels on both sides.


　　3. Some workpieces are bolted and fixed for a long time, and the processing effect using thk rolling guide rails may be somewhat low.


　　THK Slide Block Manufacturer: Cleaning and Maintenance of THK Screws


　　Stainless steel ball screws can prevent screw corrosion. For rolling parts products, corrosion and wear are problems. For a long time, in the machine tool industry, high-gloss polishing technology has been given priority to replace coating. Fine polishing technology can reduce the original corrosion points. In addition, lubricating products with added corrosion inhibitors can also play a good role in corrosion prevention.


　　Stainless steel ball screws should be used in a clean environment and should be used with dust covers to prevent dust from entering the ball screw. If dust and powder enter the ball screw due to poor dust prevention, it will not only aggravate the ball screw and reduce its function, but sometimes it will also cause blockage due to dust, damage the circulating parts, and lead to serious accidents such as the worktable falling off.


　　THK Slide Block Manufacturer: Maintenance of Stainless Steel Ball Screws


　　(1) Poor lubrication of the ball screw can cause various feed errors in CNC machine tools. Therefore, lubrication is the main content of daily maintenance of ball screws. Using lubricants can improve the wear resistance and transmission efficiency of ball screws.


　　(2) Regularly check whether the connection between the screw support and the bed is loose, whether the connecting parts are damaged, and the working and lubrication status of the screw support bearing.


　　(3) Avoid collisions with protective devices during operation, and replace damaged protective devices in time.


The above is an introduction to the cutting processing of THK guide rails. Thk guide rails have quickly replaced previous guide rails due to their unique manufacturing method, so many manufacturers now use them directly. At the same time, the accuracy during calibration, the accuracy of the output, and the speed of entry and exit of mechanical transmission mechanisms are constantly improving, which has led to many changes in the previous output functions. If you have any other questions, please feel free to contact us.