German imported brand DAMPTAC-Detec buffer DTK series-adjustable series arrived!

Publish Time：

2022-02-11

German imported brand DAMPTAC-DetaiKe buffer DTK series-adjustable series arrived!

DTK14112-LV-B/BS/BP/PP+SC/RF/SL/CM/UC

All models have arrived!!

DTK series precision adjustable

DetaiKe DTK adjustable series are widely used in automotive manufacturing, automation industries, etc. They smoothly decelerate moving loads until they stop without rebound, and their reliability has been fully verified. Simply adjust the knob to change the size of the damping force to adapt to different application conditions, providing you with the ideal cushioning effect. The DTK series is easy to select and flexible to apply; a single model can meet the needs of many different working conditions through adjustment. The DTK series has a wide range of models and specifications, with threads from M10 to M36, stroke from 7 mm to 50 mm, and single-impact energy absorption from 5.5 Nm to 692 Nm. Furthermore, accessories are complete and can solve all customer application requirements. For adjustable dampers with the same specifications and stroke, the energy absorption and effective weight of the DTK series are far higher than other brands, while the service life is as high as 5 million times impact cycles (correct selection and use); moreover, the DTK series comes with “ lateral force protection ” function. Under the same application conditions (with lateral force, without adapter), the service life of the DTK series far exceeds other brands of the same series! Based on the above advantages, the DTK series buffer greatly improves the working efficiency of machinery and equipment, saves more energy consumption, and ensures the stable operation of the entire production line with high cost performance.

• DTK is an adjustable model. The adjusting knob can rotate 360°, with scales from 0 to 12. The damping force of the buffer changes linearly from soft to hard. Through adjustment, the ideal buffering effect can be achieved.
• Most adjustable models of other brands on the market still use the outdated single-hole adjustment design. DTK uses Germany's most advanced multi-hole precision fine-tuning technology to provide a constant damping force with the minimum peak value throughout the entire buffering stroke, achieving fast, stable, and flexible buffering, shortening the buffering time, reducing impact noise, reducing equipment maintenance costs, effectively protecting production equipment, and greatly improving production efficiency.
• DTK uses advanced German composite polyester oil seals and dust seals, combined with high-strength hard chrome-plated piston rods and special material foam oil storage energy accumulators, greatly improving the service life ( up to 5 million times ) and resistance to harsh environments.
• DTK uses a unique front-extended bearing and advanced German oil-free bearings, greatly improving the product's resistance to lateral impact performance. Therefore, DTK comes with “ lateral force protection ” function.
• Impact speed: 0.01~5 m/s (special customized models can reach 20 m/s)
• Ambient temperature: -10℃ ~ +80℃ (special customized models -40℃ ~ +120℃)

TECHNICAL DATA

Energy Absorption 5.5 Nm/Cycle - 692 Nm/Cycle

Stroke 7 mm - 50 mm

Impact Speed Range 0.1 m/sec - to 5.1 m/sec

Operating Temperature 10°C to 80 °C

Mounting in any position, integrated limit stop

Outer cylinder material: Surface QPQ anti-corrosion reinforced steel; Piston rod: Hard chrome-plated reinforced steel; Piston rod cap: Reinforced steel, anti-corrosion treatment on the outer surface; Return spring: Special spring steel; Accessories: QPQ

Damping medium: Special damping deceleration hydraulic oil

DTK1007-B,DTK1210-B,DTK1412-B,DTK2016-B,DTK2525-B,DTK2540-B,DTK2725F-B,

DTK2725-B,DTK3035-B,DTK3325-B,DTK3350-B,DTK3625-B,DTK3650-B

Confirm that the adjusting knob is at position 0. Correctly install the damper in the working position and start the impact. Judge the buffering effect by the impact sound and careful observation. If there is no obvious deceleration during the entire buffering stroke and there is a loud "bang" at the end of the buffering stroke, the damping force is too small. Please adjust the scale of the buffer to position 1 and retest; if there is no improvement, continue to adjust to positions 2, 3, etc. If, when adjusted to position X, the moving load can stop quickly and smoothly, and only a "puff" sound is heard during the whole process, then the ideal buffering effect has been achieved. Use the L-shaped wrench in the product packaging to lock the locking screw and maintain this scale. Conversely, if the front or middle section of the buffering stroke suddenly decelerates and makes a loud "bang", the damping force is too large and the scale should be reduced and retested. If the ideal buffering effect cannot be achieved after repeated adjustments and tests, it indicates that there is a problem with the selection of the buffer. It may be necessary to test with a larger model, and it is recommended to re-confirm the selection.