thk ball retainer type SHS guide rail SHS20LV1SS Spot goods, large inventory

Publish Time：

2022-03-25

The THK ball retainer type SHS guide rail avoids friction between balls during circulation because the balls inside the slider are protected by a resin ball retainer, ensuring the balls move in an orderly queue.

SHS20LV1SS In stock, large inventory.

THK ball retainer type rolling guide rail SHS type
Steel balls roll along four precisely ground rolling surfaces on the LM rail and LM slider; the ball retainer and the ball returner assembled on the LM slider cause the steel balls to circulate.
The steel balls are designed to be in contact at a 45° angle to ensure that the four directions of action (radial, anti-radial, and lateral) on the LM slider have the same rated load, so it can be used in any orientation.
Because uniform pre-load can be applied, low friction coefficient is maintained while enhancing rigidity in four directions. Simultaneously, due to the low cross-sectional height and the high rigidity design of the LM slider, stable high-precision linear motion is achieved.
Because uniform pre-load can be applied, low friction coefficient is maintained while enhancing rigidity in four directions. Simultaneously, due to the low cross-sectional height and the high rigidity design of the LM slider, stable high-precision linear motion is achieved.
Because uniform pre-load can be applied, low friction coefficient is maintained while enhancing rigidity in four directions. Simultaneously, due to the low cross-sectional height and the high rigidity design of the LM slider, stable high-precision linear motion is achieved.
Because uniform pre-load can be applied, low friction coefficient is maintained while enhancing rigidity in four directions. Simultaneously, due to the low cross-sectional height and the high rigidity design of the LM slider, stable high-precision linear motion is achieved.
[Equal load in 4 directions]
Because uniform pre-load can be applied, low friction coefficient is maintained while enhancing rigidity in four directions. Simultaneously, due to the low cross-sectional height and the high rigidity design of the LM slider, stable high-precision linear motion is achieved.
45° configuration, therefore usable in any orientation, widely applicable.
[Automatic self-aligning capability]
Due to THK's unique automatic adjustment capability of the front combination (DF combination) of the circular arc grooves, high-precision and smooth stable linear motion is obtained even when pre-load is applied, absorbing installation errors.
[World standard dimensions]
The dimensions of SHS are based on the HSR type all-steel ball LM rolling guide rail, which was developed by THK, a pioneer in linear motion systems, and has in fact become a world standard.
[Low center of gravity, high rigidity]
By miniaturizing the cross-sectional dimensions of the LM rail, the center of gravity is lowered while achieving high rigidity.
By miniaturizing the cross-sectional dimensions of the LM rail, the center of gravity is lowered while achieving high rigidity.
By miniaturizing the cross-sectional dimensions of the LM rail, the center of gravity is lowered while achieving high rigidity.