Material download_Maoming

HTPM Kate Precision Machinery LM/LMW series miniature linear guide unit

Structural Features 1.Adopts a compact design with one roller track on each side, resulting in small size and light weight, making it particularly suitable for miniature equipment. 2.The groove design is a Gothic structure, with a contact angle of 45 degrees in all directions. Therefore, it has equal rigidity and load capacity in all four directions (up, down, left, and right). 3.Due to its wide guide rail width, the LMW series has high rigidity and high load capacity in terms of lateral torque, making it suitable for single use. LM7 and LM9 models also have the following features: 1.Part of the slider body uses resin material, which reduces the weight by 25% compared to ordinary sliders and reduces inertia. 2.The slider components are interlocked, resulting in a tighter structure and smoother ball circulation. 3.It has a retaining wire to prevent ball dropping. Even if the slider is removed from the rail, the balls will not fall off. 4.The guide rail, slider, steel balls, and retaining wire can all be made of stainless steel for good corrosion resistance.

2023

Introduction to the HTPM Guangdong Kate linear motor module LMS80 series embedded

What is a linear motor module? A linear motor module is a highly integrated, low-loss, and fast-response transmission platform. The LMS linear motor series adopts an iron-core flat design, with the slider and mover tightly connected, and the stator installed on a U-shaped high-strength aluminum alloy base, ensuring both large thrust and better space utilization. The linear motor module can achieve high-frequency start, high acceleration, high-speed operation, single-axis multi-mover application, and multi-axis compound operation. Linear Motor Module Features: Easy installation and maintenance Compact structure, high rigidity High-frequency start, high acceleration, high running speed High precision Low loss, long life, low noise High-precision embedded ball guide rail Dustproof steel strip, strong sealing Sawtooth structure of slider, good heat dissipation Linear Motor Module Applications: Automation industry Semiconductor, optical devices Precision measuring instruments Linear Motor Module Working Principle This module uses a linear motor for driving. The linear motor can be of various types, such as induction motors and magnetic linear motors. The working principle of the linear motor depends on the type of linear motor used, while the principle of the linear module can be found in "Working Principle of Linear Module".

2023

Introduction to THK Japan imported quiet guide rail SHS slider

THK linear guides use ball retainers to eliminate friction between balls, achieving low noise, good sound quality, long-term maintenance-free operation, and excellent high-speed performance. 1. THK World Standard - THK Linear Guide SHS Type: Each ball row is arranged at a 45° contact angle to provide the same rated load in four directions (radial, reverse radial, and lateral) acting on the LM block. This makes it a world-standard size LM guide usable in any orientation. 2. Four-Directional Equal Load: To ensure the same rated load in four directions acting on the LM block, each ball row is designed with a 45° contact angle, allowing for use in any orientation. It is widely applicable. 3. THK Super Heavy Load (Radial Type) - THK Linear Guide SNR Type: A high-rigidity radial type LM guide in the ball retainer type LM guide series. 4. THK Super Heavy Load (Four-Directional Type) - THK Linear Guide SNS Type: A high-rigidity four-directional type LM guide in the ball retainer type LM guide series. 5. THK Wide-Width Track Type - THK Linear Guide SHW Type: This LM guide uses a wide, low-center-of-gravity structure, featuring excellent Mc torque and four-directional equal load. 6. THK Miniature - THK Linear Guide SRS Type: This LM guide features a low cross-sectional height, achieving a lightweight and compact structure. 7. THK Two-Dimensional Integrated LM Rolling Guide - THK Linear Guide SCR Type: Using an orthogonal direct drive system, this LM guide achieves compact X-Y movement without a saddle.

2023

THK Japan imported linear guide slide HSR series product introduction

2023

THK Japan imported linear guide slide arrived today, SRG35LC, large amount of spot inventory

2023

HTPM Guangdong Kate linear guide clamp arrived in large quantities today CP15S

HTPM Guangdong Kate linear guide clamping device CP15S normally open type clamp arrived today, welcome to inquire. Next, let's introduce the characteristics, structure and function of Kate clamp. The rolling linear guide clamp consists of a clamp body, clamping element, actuator, contact element, etc. It is a high-performance functional component used with the rolling linear guide, which has the functions of fixing the workbench, precise positioning, preventing vibration and improving rigidity. The brake type also has the function of emergency braking. Next, I will introduce the professional terms of the clamp in detail. Normally open clamp: refers to a clamp that is in a released state when not supplied with air or oil. Normally closed clamp: refers to a clamp that is in a clamped state when not supplied with air or oil. Clamp with brake: refers to a clamp whose contact element is a brake pad. Holding force: refers to the force that resists the axial movement of the slider. The holding force varies depending on the static friction coefficient between the guide rail and the clamping mechanism. HTPM Kate clamp types CP pneumatic normally open series Features Clamping is achieved using pneumatic pressure through the wedge block amplification principle. Compact structure, strong holding force. Novel design, avoiding rigid impact during clamping. Easy installation, directly connected to the workbench without changing the workbench size. Precise positioning, suitable for pneumatic clamping of motion shafts. CPD single-cylinder pneumatic normally open series Features Clamping is achieved using pneumatic pressure through the wedge block amplification principle. Compact structure, strong holding force. Easy installation, directly connected to the workbench without changing the workbench size. CPS pneumatic normally closed series Features Clamping is achieved by the spring energy acting on the wedge block. Clamping is released by pneumatic pressure (divided into standard series and low-pressure series according to different opening pressures). Easy installation, directly connected to the workbench, no need to change the workbench size. High positioning accuracy, suitable for fixing the machining center workbench. This is a brief introduction to the structure and characteristics of the clamp. Welcome to inquire. If you have any questions, you can leave a message on the website or call directly, and professional technicians will answer your questions.

2023

What are the differences between THK Japan imported linear guide SRG series roller rail and HIWIN roller series rail?

THK develops and provides a variety of linear motion products, including LM rolling series guide rails, ball screws, and actuators. These products are widely used in machine tools, semiconductor manufacturing equipment, industrial robots, and other industrial equipment. This article provides a detailed comparison of THK's roller series guide rails and HIWIN's roller series guide rails. 1; THK Roller Series Guide Rail SRG Series The SRG is a roller-type guide rail with a retainer, featuring ultra-high rigidity. Using rollers as rolling elements, it achieves smooth, low-friction movement and is a high-rigidity roller guide rail designed for long-term maintenance-free operation. Key Features: * Ultra-high rigidity load capacity * Load capacity in four directions * Smooth movement through offset prevention * Long-term maintenance-free operation * World standard dimensions * Abundant accessories HIWIN Roller Series Guide Rail RG Series The RG series linear guide rail uses rollers instead of steel balls to achieve ultra-high rigidity and ultra-heavy load capacity. The linear contact between the rolling elements, guide rail, and slider results in only minimal elastic deformation under high loads. The 45-degree contact angle design achieves equal rigidity and load capacity in all four directions. This ultra-high rigidity significantly improves machining accuracy, meeting high-precision demands. The ultra-heavy load capacity extends the service life of the linear guide rail. It is ideal for high-speed automated industrial machinery and equipment with high rigidity requirements. Key Features: 1. Optimized design 2. Ultra-high rigidity in four directions 3. Ultra-heavy load capacity in four directions 4. Extended service life This is a brief introduction to THK and HIWIN roller guide rails. For further inquiries, please leave a message on our website or call us directly. Our professional technicians will be happy to assist you.

2023

HTPM Guangdong Kate linear guide vise arrived today CPS25S

Arrival of HTPM Guangdong Kate CPS25S normally closed ball-type clamping device today. Structure and function of the linear guide clamping device A rolling linear guide consists of a clamping body, actuating element, clamping element, contact element, etc., and is a high-performance functional component used with the rolling linear guide. It has the functions of fixing the workbench for precise positioning, preventing vibration and improving rigidity. The brake type also has the function of emergency braking. Clamping devices are also divided into normally closed clamping devices, which are clamping devices that clamp when the air is off and open when the air is on. There are also normally open clamping devices, which are clamping devices that clamp when the air is on and open when the air is off. Today, we will mainly introduce the normally closed clamping device. The model CPS25S normally closed ball type clamping device arrived today. A normally closed clamping device is defined as a clamping device that is in a clamped state when no air or oil is supplied. CPS pneumatic normally closed clamping device Features: 1. The clamping function is realized by using the spring energy to act on the wedge. 2. The clamping is released by using air pressure (divided into standard series and low pressure series according to different opening pressures) 3. Easy installation, directly connected to the workbench, no need to change the size of the workbench 4. High positioning accuracy, suitable for fixing machining center workbenches. This is the introduction of the normally closed ball series clamping device. For relevant inquiries, you can leave a message on the website or call directly. Professional technicians will answer your questions. Models arrived today: CPS15S CPS20S CPS25S CPS30S CPS35S CPS45S CPS55S These are normally closed ball series clamping devices. Welcome to inquire about the price.

2023

< 1 2 3 4...12 >

Get a Free Consultancy

Maoming Precision Machinery (Dalian) Co., Ltd.

155-2475-7549

514412810@qq.com

No. 39, Life Second Road, Dalian Economic and Technological Development Zone, 8-5

Business License

Scan the WeChat QR code

+86-155-2475-7549

8615524757549

514412810@qq.com