GET IN TOUCH Product Details
1. The ingenious design uses a clever arrangement of tracks on the left and right, resulting in a small, lightweight structure that is particularly suitable for use in miniature devices.
2. The groove design is a Gothic structure, with a contact angle of 45 degrees in all directions. Therefore, it has equal rigidity and load-bearing capacity in the up, down, left, and right directions.
3. Due to the wide track width of the LMW series, it has high rigidity and high load-bearing capacity in terms of transverse torque, making it suitable for single use.
LM7 and LM9 models also have the following characteristics:
1. Part of the slider body is made of resin material, which reduces the weight by 25% compared to ordinary sliders and reduces inertia.
2. The slider components are interlocked, resulting in a tighter structure and smoother steel ball circulation.
3. It has a retaining wire that prevents the steel balls from falling off, so the steel balls will not fall off even if the slider is removed from the track.
The track, slider, steel balls, and retaining wire can all be made of stainless steel for good corrosion resistance.
Dimensions
ONLINE MESSAGE
Through the above introduction, we believe you have sufficient understanding of us and are confident in cooperating with us. Please leave your information quickly, and we will give you the highest discount!
Get a Free Consultancy
No. 39, Life Second Road, Dalian Economic and Technological Development Zone, 8-5
Copyright © 2025 Maoming Precision Machinery (Dalian) Co., Ltd. All Rights Reserved.
