Maoming Precision Machinery
Comprehensive service provider for linear drive systems
Maoming Precision Machinery
Brand authorized, authentic guarantee
Providing you with one-stop service
Brand authorized, authentic guarantee
scroll down

ProductDisplay

The company specializes in the distribution of transmission products such as Kate guide rails and sliders, linear guides, ball screws, precision workbenches, gears and racks, and guide rail locking clamps.

ServiceAdvantage

Maoming Precision Machinery (Dalian) Co., Ltd. has a professional technical team. With the continuous development of the enterprise, a complete technical service system has been established.

Learn More MORE

Authenticity Guaranteed

Maoming Jingji also has the advantage of distributing a variety of brands of linear guides, ball screws, etc., such as THK, INA, PMI, and TBI, and has a large inventory.

Sufficient Stock

With a 600-square-meter warehouse in Dalian, a large inventory of conventional models is available.

Short Delivery Time

Maoming Jingji distributes a variety of brands of linear guides, ball screws, etc., such as THK, INA, PMI, and TBI, and has a large inventory for timely delivery.

Technical Support

Leveraging a strong resource network and years of professional experience, we provide guidance and product selection and analysis, effectively saving costs for our customers.

After-sales Service

With the continuous development of the enterprise, we have established a complete technical service system and are responsible for installation guidance and maintenance.

About Us

Learn about Maoming Precision

MORE
maoming

MAOMING

Company Introduction

Maoming Precision Machinery (Dalian) Co., Ltd. has a professional technical team. With the continuous development of the enterprise, a complete technical service system has been established. Continuously utilizing a strong resource network and years of professional experience, we provide guidance and product selection and analysis for our customers, effectively saving costs for our customers. With the increasing diversification of customer requirements, the company has established a 600-square-meter warehouse in Dalian to shorten delivery times, and a large inventory of conventional models is available.

Company Introduction
2016 year

Maoming Precision was founded in

Agency Brand

Agency Brand

Agent Brands

Agent Brands

Guide rails, modules, clamps, dampers

Agent Brands

Guide rails, screws, modules, shaft rings

Agent Brands

Linear Slides, Roller Guides

Agent Brands

Linear Guide

CUSTOMIZATION

CUSTOMIZATION

Custom Production

In addition to having a large inventory of conventional models, the company can also provide customized products to meet customers' different needs for precision and delivery time.

Custom Production

LatestNews

Learn More MORE
Linear guide rail - stainless steel guide rail

sj2025-01-08

Linear guide rail - stainless steel guide rail

Due to different working environments, there are different requirements for linear guides. Let's talk about stainless steel linear guides. Although not widely used, common brands such as THK, HTPM, and HIWIN all offer stainless steel linear guides, but only a few models are made of stainless steel. There are many short videos online introducing linear guides. These videos are short and fast-paced, requiring multiple viewings to fully understand. While they may seem informative at first glance, upon closer examination, they lack significant in-depth knowledge (personal opinion). Let's discuss the advantages and disadvantages of stainless steel guides. The advantages of stainless steel guides mainly include: 1. Strong corrosion resistance: They maintain stable performance in humid and corrosive environments, resisting oxidation, reduction, and acid-base erosion. 2. Good wear resistance: The surface is specially treated, providing high wear resistance, suitable for high-load, high-speed operation, and extending the service life. 3. High precision and stability: They enable precise sliding and positioning, improving production efficiency and product quality. 4. Strong load-carrying capacity: They can withstand significant loads and impact forces, meeting the needs of various applications. 5. Wide range of applications: They are widely used in chemical, marine engineering, food processing, CNC machine tools, automated equipment, and industrial robots. However, there are also some drawbacks: 1. Higher cost and price: The high cost of stainless steel leads to relatively expensive guides. 2. Heavier weight: The high density and weight of stainless steel increase overall equipment weight and cost. 3. Difficult to process: The high hardness and toughness of stainless steel require special processing techniques and equipment, increasing processing difficulty and cost. In summary, stainless steel guides excel in corrosion resistance, wear resistance, precision, and stability, but are relatively costly and difficult to process. Selection should be based on specific application scenarios and requirements.

Learn More MORE

Linear guide rail replacement and repair case

sj2024-12-31

Linear guide rail replacement and repair case

The following is a case study of replacing and repairing a linear guide rail: Customer feedback: "The equipment suddenly stopped moving left and right, so it needs repair." Therefore, we went to the site to replace the linear guide rail installed on the equipment. On-site confirmation: A device for processing profiles is installed above the linear guide rail. This device moves left and right using the linear guide rail to process the profiles. However, the guide rail on site could no longer move left and right, preventing it from working. It was visually apparent that the linear guide rail was damaged. When the equipment on the guide rail was lifted with a crowbar and the slider was removed, it was found to be damaged. Due to severe rusting at the mounting points of the slider and rail, it was difficult to remove the slider when disassembling it, which may have caused the damage to the linear guide rail. When we tried moving it again after replacing it with a new slider, the movement was still very poor. It is estimated that simply replacing the slider would not only cause it to be damaged again, but may also damage the rail and rack. Therefore, we informed the customer of the current condition of the equipment, the repair method and the quotation, and persuaded the customer to carry out further repairs. Repair process The equipment was lifted with a crowbar, and wooden blocks were placed under the workbench to prevent the equipment above from falling, and then the slider was removed. When trying to remove the slider, it was quite difficult to move it due to severe rust on the rail. Since the slider could not be removed smoothly, we first removed the rust using sandpaper and rust remover. (The rust on the rail made it difficult to move the slider; if the slider was forcibly moved, it could be damaged.) After the repair and test run, the workbench of the profile processing equipment ran smoothly. Suggestions on how to prevent recurrence of faults Regular inspection of transmission parts is very important to prevent unexpected damage. As a preventive measure, it is recommended to lubricate the guide rail regularly. If not dealt with in time, this kind of rust will occur, which may lead to equipment failure. (Construction site: Gunma Prefecture, Japan) The above is the main content of the repair report. This is a very common after-sales service scenario. Therefore, the questions are: 1. The report believes that the main cause of the failure is rust on the guide rail. Do you agree with this reason? 2. The corresponding measures in the report are: replacing the slider and removing rust from the rail. Is this OK? If you have better suggestions, please leave your comments and suggestions.

Learn More MORE

Kate LSQ Linear Guide Rail Unveiled

sj2025-03-05

Kate LSQ Linear Guide Rail Unveiled

Exploring the Kate LSQ Linear Guideway: High-Speed, Quiet Operation, Leading the New Trend in Precision Transmission In the field of precision machinery and automation, linear guideways serve as core components, and their performance directly affects the overall performance of the equipment. The Kate LSQ linear guideway, with its unique design and excellent performance, stands out among many similar products, making it the ideal choice for equipment that demands high precision, low noise, and high-speed operation. 1. Innovative Design, Quiet and Efficient The LSQ linear guideway adopts a four-row single circular arc groove contact design. The ingenious layout of each ball row with a 45-degree contact angle allows the guideway to easily handle loads from multiple directions, ensuring the stability and accuracy of equipment operation. Its unique feature is the ball retainer chain with spaced balls in each row. This innovative design offers several advantages: the high-strength plastic components of the ball circulation path effectively eliminate metal noise generated by collisions between balls. Compared to the traditional LGS type, the LSQ type effectively reduces noise intensity by approximately 5 decibels at all speeds, providing quiet operation for noise-sensitive work environments; the oil storage space designed in the spaced sections of the retainer chain ensures continuous lubrication of the balls during movement. This not only achieves long-term maintenance-free operation but also greatly reduces changes in frictional resistance, making the slider movement smoother. Even at high speeds, precise positioning and efficient transmission can be easily achieved. 2. Exquisite Craftsmanship, Superior Quality Controlling quality from the source, Kate LSQ linear guideways select high-quality bearing steel as raw materials. These materials undergo special heat treatment processes, resulting in uniform and extremely high surface hardness, giving the guideway excellent wear resistance and fatigue resistance, significantly extending the product's service life. In the precision machining process, relying on advanced CNC machining equipment and precision testing instruments, the dimensional accuracy of the guideway and slider is strictly controlled. Key indicators such as straightness, planarity, and slider parallelism are precisely controlled within the micrometer range. Each LSQ linear guideway undergoes multiple rounds of rigorous quality inspection procedures before leaving the factory, ensuring that every detail meets high-quality standards. Only products that pass the inspection are eligible to enter the market and be delivered to users. 3. Wide Application, Deep Empowerment With its excellent high-speed, quiet, and low-dust characteristics, the Kate LSQ linear guideway plays a key role in numerous industries. In semiconductor manufacturing equipment, its high precision and low dust content meet the stringent environmental and precision requirements of precision processes such as chip manufacturing, helping to achieve high-precision and high-efficiency chip production; in the electronics manufacturing industry, the LSQ linear guideway helps electronic assembly equipment achieve high-speed and precise motion control, adapting to the production needs of electronic products that are increasingly miniaturized and refined, improving production efficiency and product quality; in the medical equipment field, its low noise and high stability allow medical imaging equipment, surgical robots, etc., to provide more accurate diagnostic and treatment services to patients, improving the reliability and safety of medical equipment. The Kate LSQ linear guideway, with its innovative design, exquisite craftsmanship, superior performance, and wide applicability, has become a star product in the field of precision transmission. It not only provides strong support for equipment upgrades and technological innovation in various industries but also drives the entire manufacturing industry toward high precision, high efficiency, and intelligence. Choosing the Kate LSQ linear guideway means choosing a precise, efficient, and reliable linear motion solution, injecting strong momentum into the sustainable development of enterprises.

Learn More MORE

Get a Free Consultancy

Submit MORE
%{tishi_zhanwei}%